Material: Polyamide 6 composite
Filament diameter: 1.75 mm (2.85 upon request)
Color: Magenta pearl
Price: Depends on the packaging option
(please see Additional information)
NIT-MID is a Polyamide 6 composite for 3D printing. It possesses high strength, wear resistance, heat resistance, and low coefficient of sliding friction. Polyamide composites may be used to manufacture (print) parts of different mechanisms. Polyamide composites may be used to print different parts (e. g. bushings, gears, bearing elements, etc.) that were initially manufactured by injection molding. It should be noted that the properties of printed products are only a little bit different from those of injection molded products.
|Melt flow rate, g/10 min||Load: 2.16 kg, temperature: 230 ˚С||5.5|
|Tensile strength, MPa||Extension rate 50 mm/min||53.2|
|Ultimate elongation, %||Extension rate 50 mm/min||220|
|Unnotched Charpy impact strength, kJ/m2||Impact machine 5 J, temperature 23±2 ˚С||A sample was not broken|
|Notch Charpy impact strength, kJ/m2||Impact machine 5 J, temperature 23±2 ˚С||13.7|
|Vicat softening temperature, ˚С||Heating rate 120 ˚С/hour, load 50 N||195|
1000 g, Wholesale: Best Offer!